The small diagonal braces of the building formwork can be used in conjunction with hydraulic jacks to apply pre-pressure to the supports and adjust them in real time.

There are two types of joints for small diagonal braces in building formwork: welding and bolted connections. Bolted connections are easy to assemble on site and have no problems with welding residual stress, so they are more common in practical applications. In order to overcome the shortcomings of the small diagonal brace's low stiffness, the small diagonal brace can be used in conjunction with a hydraulic jack to apply adjustable axial pressure to the small diagonal brace to improve the stiffness of the support.

Before processing the small diagonal braces of the building formwork, the foreman in charge of the processing will explain the safe operating procedures and precautions of the processing machinery, and the mechanical technician will inspect all mechanical properties. They can only be used if they are qualified. The small diagonal braces must be inspected during transportation. Pay attention to traffic safety. Safety equipment such as small lights and warning lights should be installed at the rear of transport vehicles.

Front and back wire small diagonal braces are suitable for high-rise and long-span structures. Steel has uniform material, good plasticity and toughness, and high structural reliability. The internal crystal structure of steel is densely arranged and uniform. It is an elastic-plastic material with approximately isotropy and good plasticity and toughness.

Before processing the small diagonal braces for the front and back yarns, the foreman in charge of processing will explain the safe operating procedures and precautions of the processing machinery, and the mechanical technician will check all mechanical properties. Only those that pass the test can be used. The small diagonal braces are during transportation. Pay attention to traffic safety, and safety equipment such as small lights and warning lights should be installed at the rear of transport vehicles.

There are two types of joints for front and back wire small diagonal braces: welding and bolted connections. Bolted connections are easy to assemble on site and have no problems with welding residual stress, so they are more common in practical applications. In order to overcome the shortcomings of the small diagonal brace's low stiffness, the small diagonal brace can be used in conjunction with a hydraulic jack to apply adjustable axial pressure to the small diagonal brace to improve the stiffness of the support.

Basic Info

Our Advantages

1. We are the manufacturer.

2. We have strict control over raw materials.

3. We have an experienced and technically mature team.

4. Timely delivery after receiving orders.

5. We support processing and customization.

6. We will provide you with considerate service.

Application